Download FUEL SYSTEM DESCRIPTION Fuel is drawn by the supply pump through a pre-filter screen in the tank and to the engine through the fuel supply lines. There is no lift pump in the fuel tanks or on the frame. The fuel passes through the base plate of the fuel injector control module (FICM) to cool the module. From the FICM the fuel flows to the fuel filter/heater element housing, which combines a water separator, a prime pump, a fuel heater element and a filter element. The fuel is then delivered to the high-pressure pump. An integrated hand pump is used to prime the fuel system after changing the fuel filter or servicing the fuel system. The fuel injection pump at the front of the engine valley includes the fuel supply pump and the high-pressure pump. If the fuel system is not suppling enough fuel, a driveability concern may occur. If air is being drawn into the fuel injection system, a Cranks But Will Not Run or Hart Start symptom could exist. HIGH PRESSURE SYSTEM The much larger section of the pump assembly is the high-pressure fuel injection pump. The pump is engine-driven by the camshaft gear. From the high-pressure pump, the pressurized flows to the left common fuel rail. A balance pipe from the center of the left rail then feeds the right common fuel rail.